Browse Our Catalog

Pullers - Page 3 - Huge Savings! Save up to 20%


Huge Savings! Up to 20% off on Pullers at On State Recycling, Page 3. Top brands include OTC, 8MILELAKE, BestEquip, OrionMotorTech, Torin, Yellow Jacket, ABN, Cal-Van Tools, OEMTOOLS, & Tusk. Hurry! Limited time offers. Offers valid only while supplies last.



OTC 6779 Injector Puller for GM Duramax Engine
OTC 6779 Injector Puller for GM Duramax Engine
By OTC
In Stock
$59.54
$50.33
You Save: 15%

mpn: 6779, ean: 0731413576331,

4.5 out of 5 stars with 55 reviews
OTC's Injector Puller for 2005-2011 GM Duramax 6.6L engines safely pulls the injectors without pulling the injector cups. Simply insert the tool into the injector retainer bracket bolt hole, attach a socket and ratchet/breaker bar to one of the hex ends and start rocking back and forth - the injector will pop right out. Durable steel construction means tool will withstand heavy shop use and continue to perform as designed. Value is at the core of the OTC tool and equipment portfolio. For a simpl


8MILELAKE 16pc Slide Hammer Dent Puller 2/3 Jaw External Internal Oil Seal Bearing Remover
8MILELAKE 16pc Slide Hammer Dent Puller 2/3 Jaw External Internal Oil Seal Bearing Remover
By 8MILELAKE
In Stock
$49.95

mpn: Puller, ean: 0700425111939,

4.2 out of 5 stars with 48 reviews
Slide Hammer And Dent Puller Kit 5 lb.malleable steel slide hammer External 3-jaw puller, internal 3-jaw puller, external 2-jaw puller, internal 2-jaw puller Solid Steel T-handle shaft provides secure grip Chrome vanadium steel attachments Work as well as pulling bearings, gears and axle shafts. Perfect For Home Or Business. Blow Molded Case IncludedSlide Hammer And Dent Puller Kit. Combination Puller With 5LBS Malleable Steel. Drop Forged Steel Pullers And Attachments. Converts Into A 2 Or 3 Ja


BestEquip 3T Pallet Puller Steel Single Scissor Yellow Pallet Puller Clamp 6614 LBS Capacity Pallet Grabber 6.3 Inch Jaw Opening x 0.5 Inch Jaw Height
BestEquip 3T Pallet Puller Steel Single Scissor Yellow Pallet Puller Clamp 6614 LBS Capacity Pallet Grabber 6.3 Inch Jaw Opening x 0.5 Inch Jaw Height
By BestEquip
In Stock
$56.99

mpn: Pallet Puller,

4.7 out of 5 stars with 28 reviews
3 Ton Pallet Puller Clamp This pallet puller is made of solid steel, resistant to wear and corrosion. To use, simply attach the puller to your pallet and your forklift using a chain or strap with hook. As you pull, the puller will increase the grip on the pallet plank for safe movement. The single-scissor mechanism allows the jaw to open up to 6'' wide. This pallet puller has a pulling capacity of 6614 lb. It can be widely used in warehouses, manufacturing and shipping facilities, and other indu


OrionMotorTech Bearing Puller | 5-Ton-Capacity Bearing Separator | Wheel Hub Axle Puller | Pinion Bearing Removal Tool Kit | Bearing Splitter
OrionMotorTech Bearing Puller | 5-Ton-Capacity Bearing Separator | Wheel Hub Axle Puller | Pinion Bearing Removal Tool Kit | Bearing Splitter
By OrionMotorTech
In Stock
$39.99

mpn: OMTBSK14,

4.3 out of 5 stars with 39 reviews
Stop worrying next time when you try to replace your bearings. Meet the perfect help in the gears, pulleys, bearings, axle shafts and pinions replacement on your car or truck and replace bearing seals back into the gears, pulleys, pinions and axle hubs. Our kit comes with everything you need for a fast & effective removal and/or installation of small and large wheel bearings on front and rear wheel hubs, gears, pulleys etc., it comes with the heavy duty drop-forged 2'' & 3'' bar-type bearing spl


8MILELAKE 14PCS Bearing Separator Puller Set Heavy Duty 5-Ton Capacity 2inches and 3inches Splitters Remove Bearings Kit
8MILELAKE 14PCS Bearing Separator Puller Set Heavy Duty 5-Ton Capacity 2inches and 3inches Splitters Remove Bearings Kit
By 8MILELAKE
In Stock
$32.99

mpn: SZ, ean: 0614019645673,

4.8 out of 5 stars with 33 reviews
Features: Separator tools are used with bar puller and legs for a wide variety of pulling jobs. The 5inches puller cross-bar with a 6-1/4inches forcing screw or each of the bearing separators may also be used separately or in combination with other pullers or tools. Kit included: Drop Forged Construction; Two Most Popular Bearing separator jaws( Splitters) - 2inches & 3inches Extension Legs - 4inches & 5inches Hex Push Puller Legs - 4 sets Yoke center adapter - 6inches Puller Head Bar A-Type w


Torin Big Red Come-Along Double Gear Hand Cable Puller with 3 Hooks: 4 Ton (8,000 lb) Capacity
Torin Big Red Come-Along Double Gear Hand Cable Puller with 3 Hooks: 4 Ton (8,000 lb) Capacity
By Torin
In Stock
$45.78
$44.41
You Save: 3%

mpn: T32054, ean: 0615268320540,

4.5 out of 5 stars with 22 reviews
This cable puller features a double wheel and double claw. It is ideal for constructions, automotive, farm and ranch, home projects and workshop. Capacity: 8000 lbs.Double wheel. Double claw. Capacity: 8000 lbs. Ideal for constructions, automotive, farm and ranch, home projects and workshop.


8MILELAKE 9 Way Slide Hammer Axle Bearing Dent Hub Gear Puller Set
8MILELAKE 9 Way Slide Hammer Axle Bearing Dent Hub Gear Puller Set
By 8MILELAKE
In Stock
$53.99

mpn: Puller, ean: 0700425112523,

4.2 out of 5 stars with 34 reviews
9-way slide hammer puller set pulls flange-type rear axles and most front-wheel drive hubs and the internal and external jaws provide a variety of combinations to pull bearings, gears and seals. Two and three way cross blocks and cone provide the perfect jaw configuration for most jobs. The set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements blow molded case for storage.Pulls flange-type rear axles and most front-wheel drive h


OTC 4517 Stinger 7-Ton Bar-Type Puller/Bearing Separator Set
OTC 4517 Stinger 7-Ton Bar-Type Puller/Bearing Separator Set
By OTC
In Stock
$112.33

mpn: 4517, ean: 0731413547195,

4.5 out of 5 stars with 38 reviews
Now service and maintenance professionals have a puller or bearing set for tough jobs, up to 7-tons, larger applications, and greater reach 8 inch to 16 inch. As a standalone puller or bearing splitter set or as a compliment to the 4518 version, this 7-ton puller or bearing separator set gives your maintenance or service shops the expanded capability to keep more business in house. Includes a Bearing Splitter with 4 inch capacity, two sets of hex push puller legs, an 8 inch bar type puller head


OTC (7394) Universal Hub Puller
OTC (7394) Universal Hub Puller
By OTC
In Stock
$120.07
$119.81

mpn: 7394, ean: 0731413010705,

4.2 out of 5 stars with 59 reviews
The OTC 7394 features adjustable sliding arms. This puller makes wheel-hub removal quick, easy, and damage free. Maximum bolt circle of 7-1/2''. Won't distort wheel lugs. Includes striking wrench and puller screw.Adjustable sliding arms. This puller makes wheel-hub removal quick, easy, and damage free. Maximum bolt circle of 7-1/2 inches. Won't distort wheel lugs. Includes striking wrench and puller screw.


8milelake Rear Axle Bearing Puller Extractor Installer Set Kit Service Repair Slide Hammer
8milelake Rear Axle Bearing Puller Extractor Installer Set Kit Service Repair Slide Hammer
By 8MILELAKE
In Stock
$21.99

mpn: SZ, ean: 0700425113360,

4.2 out of 5 stars with 48 reviews
Constructed From Heavy Duty Cast Steel Bearing puller makes it easy to remove semi-floating rear axle bearings Axle sizes this unit will work with 1'' to 1-7/8'', 1-5/16'' to 2-3/8'', or 1-3/8'' to 2-7/8'' Comes with storage case Slide hammer end thread is 5/8'' TPIConstructed From Heavy Duty Cast Steel. Bearing puller makes it easy to remove semi-floating rear axle bearings. Axle sizes this unit will work with 1'' to 1-7/8'', 1-5/16'' to 2-3/8'', or 1-3/8'' to 2-7/8''. Comes with storage case.


YELLOW JACKET 60590 Fan Blade Puller Complete
YELLOW JACKET 60590 Fan Blade Puller Complete
By Yellow Jacket
SKU: #16075
In Stock
$96.00
$91.95
You Save: 4%

sku: 16075, mpn: 60590, ean: 0686800605906,

4.2 out of 5 stars with 45 reviews
YELLOW JACKET 60590 blade puller set all steel design includes a 15/16 inch hex head and 5/8 inch shaft Miller back 1-1/2 inch and undersized for 1/2 inch shaft opening. A self centering alignment tool is included. made in United States. Manufactured by Ritchie engineering Co.Remove squirrel cage type blower wheels. Pull off fan blades. Remove pulleys or sheaves. Fits 1-3/4 inch.


ABN Bearing Puller with 1/2in to 4-5/8in Jaw - Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator
ABN Bearing Puller with 1/2in to 4-5/8in Jaw - Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator
By ABN
In Stock
$36.25

mpn: 6878, ean: 0688295876878,

4.8 out of 5 stars with 39 reviews
Smoothly separate bearings and remove gears with the ABN Bearing Puller with 1/2'' to 4-5/8'' Inch Jaw - Splitter Tool for Wheel Hub, Gear Pinion, Bearing Separator. There are several uses for the puller arms and it will work where other pullers fail. Use them to remove pinions and differential bearings, take off shaft bearings and gears, and successfully rebuild your vehicle's transmission. If you want to remove a bearing, assemble the big silver plate below it, screw the black arms into the si


ABN Bearing Separator Set, 5-Ton Capacity - Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit
ABN Bearing Separator Set, 5-Ton Capacity - Bar-Type Bearing Splitter, Gear Puller, Fly Wheel Separator 12-Piece Kit
By ABN
In Stock
$53.99

mpn: 4218, ean: 0688295874218,

4.7 out of 5 stars with 11 reviews
When you need to separate bearings, use the ABN Bearing Separator Set. It can but used for pulling jobs such as removing bearings from a shaft, splitting bearings, and separating flywheels. It has up to 5 Tons (4.5 MT) capacity and can be used separately or with other pullers or tools. Each piece in this set is drop forged and heat treated with a black oxide finish. The threads on the separators are smooth and come well-oiled. It all comes in a 15'' x 9.7'' x 2'' (38cm x 24.6cm x 5cm) blow-mold


Cal-Van Tools 94800 Hub Puller
Cal-Van Tools 94800 Hub Puller
By Cal-Van Tools
In Stock
$76.81

mpn: 94800, ean: 0047084948002,

4.0 out of 5 stars with 11 reviews
Tool will remove wheel hubs mounted on tapered axles and press fit rear brake drums. Can be adjusted by legs to an 8 inch diameter bolt circle. Made of alloy steel and drop forged, this heavy duty tool has a center screw with a 1-1/8 inch hex head.Can be adjusted by legs to an 8 inch diameter bolt circle. Made of alloy steel and drop forged. Heavy duty tool has a center screw with a 1-1/8 inch hex head.


OEMTOOLS 27104  4-Wheel Drive Spindle Puller Attachment
OEMTOOLS 27104 4-Wheel Drive Spindle Puller Attachment
By OEMTOOLS
In Stock
$39.59

mpn: 27104, ean: 0076812271044,

4.7 out of 5 stars with 43 reviews
The OEM 4WD Spindle Puller Attachment is used to pull most front spindles on 4WD vehicles. For use with OEM Slide Hammer #27033Use with OEMTOOLS slide hammer #27033. Fits most spindles 1-1/2 in, 1-5/8 in, and 2 in on four wheel drive vehicles. Heat treated for strength. Will fit on 2 puller size shafts 1/2 in x 20 in threads and 5/8 in x 18 in threads.


Tusk Bearing Remover
Tusk Bearing Remover
By Tusk
In Stock
$74.10
$69.99
You Save: 6%

mpn: 121-908-0001,

4.2 out of 5 stars with 58 reviews
With the Tusk Bearing Remover you can remove bearings the easy way. So the hammer and socket can stay in the drawer. Made from hardened steel, this tool is built for the beginner and professional alike. The Tusk Bearing Remover easily takes care of stubborn bushings and bearings during rebuilds or maintenance. And with the included collets ranging from 8mm to 30mm, you shouldn't have any problems. Get the Tusk Bearing Remover and save the elbow grease for lateKit includes slide hammer, 8 collets


OTC (1026) Mechanical Grip-O-Matic Puller - 5 Ton, 2/3 Jaw (Reversible Jaws)
OTC (1026) Mechanical Grip-O-Matic Puller - 5 Ton, 2/3 Jaw (Reversible Jaws)
By OTC
In Stock
$53.85
$43.08
You Save: 20%

mpn: 1026, ean: 0731413010262,

4.9 out of 5 stars with 45 reviews
The OTC 1026 is part of a complete line of gear and bearing pullers, enabling you to remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed its rated capacity.5 ton capacity, 2/3 jaw, reversible jaws. Maximum reach of 3-1/4 inches. Maximum spread of 7 inches. Upper jaw thickness is 5/16 inch, lower jaw thickness is 1/4 inch. Upper jaw width is 3/8 inch, lower jaw width is 3/4 inch.


OTC Puller Set, Bearing
OTC Puller Set, Bearing
By OTC
In Stock
$121.67
$118.37
You Save: 3%

mpn: 4534, ean: 0731413040276,

4.1 out of 5 stars with 40 reviews
Bearing and Pulley Puller Set, Multipurpose, For Use With Bearings, Alternators, Timing Gear, Max Spread 5 In, Min Spread 3 In, Reach 1 To 2 1/4 Inches, Screw Size 3/4-16 x 6 11/16 Inches and 3/4-16 x 5 Inches, Includes 2 Forcing Screws, 2 Cross-Bar Yokes, 2 Clamp Bolts, 3 Pair Puller Jaws, 1 Pair Jaw Pins, 3 Pairs of Cap Bolts, Blow Molded CaseMpn: 4534. Country of manufacture: Taiwan. Manufacturer: Otc.



Viewing Page 3 of 3

View more products in Pulling & Lifting.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - onstaterecycling.com. All Rights Reserved.