Master Magnetics Flexible Magnet Sheet with White Vinyl, Sign Blank - 1/32'' thick x 24'' wide x 48'' long (1 sheet rolled inside tube)
Free Shipping Included! Master Magnetics Flexible Magnet Sheet with White Vinyl, Sign Blank - 1/32'' thick x 24'' wide x 48'' long (1 sheet rolled inside tube) by Master Magnetics at On State Recycling. MPN: B005HY9IBQ. Hurry! Limited time offer. Offer valid only while supplies last. For best results: 1)Allow magnet to reach room temperature. 2)Unroll magnet. 3)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. If applying to a painted vehicle, the vehicle's surface should be waxed a minimum of 48 hours in advance before applying magnetic sheeting. For new vehicles or newly painted vehicles, wait approximately 90 days for the paint to cure before applying magnetic sheeting. Caution: Avoid repainted surfaces, non-metallic body fillers and
Product Description & Reviews
For best results: 1)Allow magnet to reach room temperature. 2)Unroll magnet. 3)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. If applying to a painted vehicle, the vehicle's surface should be waxed a minimum of 48 hours in advance before applying magnetic sheeting. For new vehicles or newly painted vehicles, wait approximately 90 days for the paint to cure before applying magnetic sheeting. Caution: Avoid repainted surfaces, non-metallic body fillers and wood grain vinyl siding. Wipe the surface of the vehicle with a clean dry cloth before application and make sure that all grime, dust, and dirt has been removed. It is best to apply flexible magnetic sheeting when the temperature of magnet is around room temperature or about 60 degrees Fahrenheit. Carefully align one edge of the flexible magnetic sheet to the vehicle's surface. Allow the remainder of the sheet to apply itself to the vehicle's surface. Do not allow air pockets to form under the sheet. If not aligned correctly, be sure to completely remove the sheeting and start over again. Do not pull or drag the sheet to realign it. This can damage or stretch the material. TAKE CARE AND CLEAN magnetic sign by removing flexible magnet sheeting periodically to guard against moisture and dirt buildup. Trapped dirt between magnet and vehicle can damage its finish. Clean flexible magnetic sheeting as well as the surface to be re-applied weekly with a mild detergent, wipe with a soft cloth and allow to dry. This helps to lengthen the life of your flexible product and protects the surface of your vehicle. Withstands continuous exposure to temperatures ranging from 0 degrees Fahrenheit to 150 degrees Fahrenheit.
Features & Highlights
- 1/32" thick x 24" wide x 48" long flexible magnetic sheet is magnetic on one side only with a white vinyl on the reverse and is used as a sign blank for creating vehicle signs or large magnetic signs.
- The non-magnetic side is laminated with a white vinyl with satin finish, and is printable with screen print Inks, lettering enamels, self-adhesive backed vinyl letters and numbers and wet-erase type markers.
- This product is NOT designed for magnets to stick to RATHER it holds itself directly to a flat, smooth steel surfaces like fridge and auto.
- If magnet is applied to smooth, flat, ferrous steel without holes and without material or paper between pounds of pull are up to 85 per square foot, less for smaller pieces.
- Can be cut with heavy scissors, knife, or die.
24 x 0 x 48 inches
2.5 x 2 x 26 inches
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Master Magnetics, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
By Master Magnetics
mpn: ZGNRE20BX, ean: 0095421005765,
Organize and label shelving and storage areas with repositionable magnets. Saves time & money compared to self adhesive labels. Available in four different flexible magnet heights. Withstands continuous exposure to temperatures ranging from -15 degrees to 160 degrees Fahrenheit.Flexible, pre-formed ''C'' channel magnet designed to hold directly to flat or slightly curved steel surfaces. Holds magnetically on one side only, opposite side holds paper data card. Simply cut flexible magnet with
By Superior Graphic Supplies
This premium Superior Graphic Resources film is made with a special quality Magnetic Roll which extremely strong and flexible. Item is designed to adhere to Ferrous surfaces (ex. Steel, Iron) This product does not adhere to Aluminum, Plastic, or Stainless steel. It is also not designed for use on ceilings or surfaces where it is mounted upside down. This product is design for mounting on flat horizontal surfaces (ex. car doors). This products magnetic strength is designed to only be strong
By Master Magnetics
mpn: ZG05A-ABX, ean: 0095421003686,
Perfect for making flat lightweight items magnetic. Magnet requires direct and full contact with steel for maximum hold, therefore it is best to make sure that magnet is flat. Magnet & adhesive work best when applied at above 60 degrees Fahrenheit or 15.56 degree Celsius. For best results: 1)Allow magnet to reach room temperature then cut magnet with heavy duty scissors or hobby knife. 2)Apply magnet's dark gray side to large metal surface for several hours to flatten curl. Do not roll magnet
By Master Magnetics
mpn: ZGN30PBX, ean: 0095421006083,
The flexible magnet strip roll is magnetic on one side and can be easily repositioned on flat or slightly curved steel surfaces. The strip has a small groove to identify the non-magnetic side. Strength rating is 9 pounds of pull per linear foot. The strip withstands temperatures from -15 to 160 degrees F and can be cut with scissors.Flexible magnets can be easily cut and shaped for a range of applications. They are produced by mixing powdered iron or ferrite with a rubber or plastic binder, and